PROJECTS

Here you will find what I have been getting up too, so if you ever become a client, you might just find you outfit here (with you permission of course)

Hi-low Top Tutorial – The “hide it all but still chic” Top

Hi guys!!!

Its been a long time since I posted a tutorial, but it has all been for very good reasons, aside from expanding my waistline with one to many treats (as you do), I have had a lot on and promise to spill the beans all in good time. Talking about expanded waistlines, dont you just hate it when we get those sudden bursts of sunny days that you haven’t conditioned your body for? you know, that “OMG summer is here and I still haven’t kicked these kgs” moment. Well, worry not!! I have taken it upon myself to provide you with this tutorial for an uber cute top that will hide all your wintry sins; yes I am that considerate (and I have an occasion to attend tomorrow, the sun is shining and quite frankly my summer body isnt ready, but I still gotta look cute, O the dilemmas of a Lady!!!) .

Ok, so here’s what we are making:

image (6)

You will need;

DSC_1016

 

Fabric

Fusible interfacing

scissors

Pinking sheers

Measuring tape

Ruler

large piece of paper (I have brown paper roll but even newspaper will do)

Chalk and a pencil (with a rubber at the end)

Steam iron.

Measurements needed

Back

Bust

shoulder to bust

shoulder to waist

shoulder to hips

Round sleeve, Round Elbow

Sleeve length, Elbow length

Method

Essentially your piece of paper is going to be used to make a template that will be laid on the bias folded fabric; this is what gives you the voluptuous fall in the back of the top; however, since I always cut the front and back of a bodice together, we will make a template for the front and back in the same manner. I would normally do all what I’m about to show you directly onto the fabric but I have chosen to do a template because of how we will angle it on the folded fabric.

The piece of paper you are using needs to be shoulder to hip measurement long and half the bust measurement +6″ wide. Once you have cut this out, fold it in half and you are ready to start. Note: remember you always work from the centre out, unless otherwise stated.

Step 1

From the top corner, measure 3.5″ along the top edge, then along the folded edge measure down 5.5″ and join these two marks with a rounded semi “v”; this is your front neck hole. Working again at the top edge mark half your back measurement+ 3/8″

DSC_1019

 

Step 2; place the top of your tape on the top edge of the paper measure down 7″ and mark. then mark your vertical measurements+0.5″ (shoulder to waist and shoulder to hips)

DSC_1020 DSC_1021

These marks will now serve as reference points, along which you will place your horizontal measurements.

Step 3; along the line of your first reference point (the 7″ down mark) mark a quarter of your bust measurement+2″. Along the last reference point (shoulder to hips, this should actually be the bottom edge of the paper), mark a quarter of your bust measurement+3.5″.

DSC_1025DSC_1026

 

Step 4; From the bottom centre corner, measure up 2.5″ , from here curve a line down that meets with the mark along the bottom edge. Now join the horizontal measurement marks with a straight line; it should look like this.

DSC_1028 DSC_1029

Step 5; At the top of the straight line draw a straight line 2″ in towards the centre, then from the furthest marking from the centre, along the top edge, draw a deep curve the joins the 2″ line you just made. It should now resemble the second picture.

DSC_1030 DSC_1031

 

mark 0.5″ along the top of the curve and slant a straight line that meets the corner of the neck hole; this will form your shoulder slope, like so

DSC_1033

Step 6; return to the 2″ line you drew and repeat the same, exactly 2″ below it

DSC_1035

Step 7; back at the shoulder slope (outer edge) draw a shallower curve that meets the second 2″ line.  Inside the neck hole, draw a shallower curve that will form the back neck hole, this really shouldn’t be more than 2″ deep. return to the

DSC_1038DSC_1037

 

Step 8; You are now ready to cut! please pay close attention to this statement; only cut around all outer lines. This is because you are cutting front and back pieces together and not all lines are the same, as you can see.

when you have cut out your pieces it should look like this;

DSC_1040

 

cut along the fold, and separate the pieces. Transfer the armhole markings unto the back piece, from the front piece, cut this out, then cut the front neck hole, erase the bottom half of the back armhole curve and cut the deeper front armhole curve.

DSC_1042 DSC_1043 DSC_1044

Templates done and ready to be used. The back piece has the higher neck line and lower armhole, mark them accordingly so you don’t get confused. Believe me, this is a very easy and annoying mistake to make.

Step 9; for the back piece, fold the fabric at a 45 degree angle (raw edge folder over to line up with selvage edge)

DSC_1046

 

Lay your back template piece on the fabric as shown in the picture (note; the centre of the template is facing the folded edge),

DSC_1047

along the bottom draw a curve that is lower at the folded edge, and slopes upwards to meet the bottom outer edge of the template. It should resemble this:

DSC_0001

cut this out and set aside.

Step 10; Fold another piece of fabric as you normally would if you were cutting out a pattern piece, line the centre of  your front template with the fold and cut out.

DSC_0008

This top will need some side bust darts, although the top is not fitted, darts will help it hang better on the body. To create the darts, place the top of your tape measure at the highest point of your shoulder seam, measure down your shoulder to bust measurement and mark. along the side seam place a mark about 1″ lower than the mark you just made;

DSC_0009 DSC_0010

draw a straight line that connects these two marks, then press along this line:

DSC_0011 DSC_0013

 

Unfold the piece and use your iron to invert the right side facing crease. these are your dart lines (the centre of your darts), use your tape to measure a dart that is 1″ deep and 5.5″ long, draw this with chalk:

DSC_0016DSC_0017

set this aside.

Step 11: To make the facing for the front and back pieces, lay the template pieces on the fold of fabric cut right around the neck, shoulder and armhole, stopping 1.5″ beyond the armhole, along the side seam. lift the template up and draw an arch that curves towards the neckline.

DSC_0003 DSC_0004

 

Cut this out and use the pieces as templates for cutting the matching fusible interfacing.  Fuse the interfacing to the facing, snip along the bottom edge with pinging sheers, turn up a single 3/8″ hem and sew.

DSC_0005 DSC_0007

 

Construction

Step 12; sew your darts

Step 13. Lay the facing over the relevant piece, right sided facing each other, pin (if you must) and sew with a 3/8 seam allowance. Press the seam allowance towards the facing and top stitch on the right side of the facing (this is done right at the edge of  the seam). press

step 14. You will now treat the facing and the top pieces as one. Lay the front piece on top of the back piece, right sides facing inwards, pin the side seams

DSC_0026

 

sew with a 0.5″ seam allowance.

step 15; open the shoulder seams so that the right side of the facings are facing each other and the right sides of the front and back piece are facing each other, sew it like this:

DSC_0027

 

your top will now look like this inside out:

DSC_0028

Finish the hem by doing a double turned hem, I thing this is the best way for this top.

for sleeves follow my tutorial on sleeves, the link is: http://chinelobally.com/2014/02/04/busy-bee-how-to-cut-a-sleeve-without-a-pattern/

sew in your sleeves and there you have it, the most forgiving top ever.

I have added a leather appliqué to the neckline of mine and also added shoulder pads for extra sharpness. I’m thinking, black skinny jeans and heels?.

I really hope give it a go, and please send me pictures of your completed garments, I get sew excited (sorry, I couldn’t help that) when I see what other people have done. As ever if you have any questions just send them over and I will try my best to answer.

Have a blissful week

xxx

Advertisements

Thank you all xxx!!!

Hi Stitch-hearts (lamest pun ever but I like it)

Its been a while since I posted on my blog but I’m sure everyone can appreciate how hectic it has all been, but I am giving my scouts honours word that I will be posting a new tutorial more regularly.

Firstly, and most importantly, I will like to say a huge thank you to all of you who have supported my sewing bee journey, I am so grateful for all the kind messages that have kept me very busy responding. to all the new followers, welcome to my blog and I hope it will be a useful resource for you.

I really felt the support of the British public and  am so pleased with how my approach to sewing has been received. Doing sewing bee is an experience I will never forget and I am so thankful to have been short-listed for the programme. I know the application for next years series has closed but I will strongly recommend anyone considering taking part in the one after to go for it.

Being in a room full of people who shared my passion for sewing was amazing and something I had never experienced before. All the contestants were fantastic; a really good bunch and I loved every minute of it.

When it came down to the final and it was just Heather, Tamara and myself, I must admit that it induced some bitter-sweet feelings; I was proud to be competing with such experienced sewists in the finals but was also afraid of that same fact. I have to say that losing the crown to Heather, was not a loss at all, technically, Heather is a fantastic sewist and she is highly skilled, she deserved her win!

?????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????

I’m sure everyone remembers my tie melt down. Gosh that was a very wordy pattern and not being a pattern girl it completely threw me. Prior to the sewing bee I had never used a pattern, but when I was confronted with my first pattern for the show, I relied heavily on the pictures for direction. So sorry to all those who were disappointed with the melt down, but hey, I never have to make a tie EVER again (I say that now but something inside me tells me I will soon post up a tutorial on making a tie freehand).

I love making glamorous gowns so designing my finale dress was O so joyous to say the least. I have to say a massive thank you to my bestie Rose for being my model, I still cant believe it, she doesn’t even do phone cameras so imagine my utter shock when she walked in to a room full of broadcasting cameras for a BBC programme, talk about conquering your fears!! Extreme! The dress looked amazing on Rose and I was very happy with it.

image (4) image (5)

Wish I had some more time to press out all those creases though.

After the show aired on Tuesday I have had hundreds of emails about workshops so I have added a couple more dates for London!!! the link for these is below but they are filling up fast so if you are interested get in there as soon as possible

https://www.kazoova.com/activity/407/

I have also had loads of interest from readers and viewers outside the UK and I am working on ways to get you free-handing so once things have been confirmed I will  put up a post to update everyone, but there are loads of exciting things happening so expect some good stuff  😉

Have a wonderful day

With Love

Chinelo

xxx

Busy Bee – How to cut a sleeve without a pattern

Hi everyone.

So I haven’t posted anything in a while, I have been so busy with an exciting new project; I am currently making some beautiful pieces for the photo shoot for my website (I will update everyone once it is up and running) and my clients have kept my sewing machines rumbling with plenty of orders, no complaints there however 🙂 . Stay tuned because there will be loads of exciting news to share with you guys over the next few weeks and beyond *wink wink*.

If like me you do not like showing your arms, and I believe this is the case with so many women I come across, this tutorial might just be a life saver. The ability to add sleeves to ready made sleeveless garments is a very handy skill because it means you don’t have to pass up on that dress you wish had sleeves in the shop, you can be creative with the kind of sleeve and your fabric choice and it is a great way for a newbie to get used to working the sewing machine. so here goes……

You will needImage

Fabric

Tape measure

Scissors

chalk, or something to mark you fabric with

ruler

sewing machine

steam iron

Measure the circumference right at the top of the arm, (Round Sleeve RS). Don’t wrap the tape too tight here because you will need a some ease.

Measure the circumference around your elbow area, (Round Elbow RE), do this by bending your elbow at a 90 degree angle and then measure.

Measure the wrist circumference, bare in mind that your hand has to slip in and out of the wrist comfortably, so if you are not using a stretchy fabric then you must make this measurement accommodate your hand (I usually make a loop with the tape and test for ease of entry)

Measure your sleeve length and your elbow length (watch this link as it shows you how to measure for freehand cutting http://www.youtube.com/watch?v=dkywf2kGthg&feature=youtu.be )

Half the RS, RE, and wrist measurements

Cut out a piece of fabric that is the length of your sleeve+4 inches and the width of your RSx2 + 3 inches

Fold the fabric in half width-wise and press and in half again width-wise and press, you should have one edge that has two folds and the opposite edge should have a cut edge and a folded edge, the edge with the 2 folds are now the centre of each sleeve.

Working on the folded edge (cdenter sleeves) mark your sleeve length adding half an inch to the top and one inch to the bottom of the sleeve

Then mark your elbow length along the same edge.

Measure 6 inches down from the top of the sleeve centre edge and mark (this is the RS point)

Those are your vertical measurements for your sleeves done, now the horizontal measurements and remember you are working with the halved measurements now

from the RS point mark the halved RS measurement+0.5 inch horizontally

Do the same with the elbow and wrist from the previously marked round elbow and wrist points (the wrist is the bottom of the sleeve)

using a ruler draw a line the connects the RS, RE and Wrist marks

At the top of the sleeve freehand a curve that slopes down from the RS point and climbs up to round the top of the sleeve

Image

This is how your sleeve should look, now cut it out and notch the centre edge at the bottom and the top. you are ready to sew your sleeve!!!!

To set in your sleeves, match the notch at the top centre of your sleeve with the edge of your shoulder seam and sew.

Here is what I made.

Image

please send me pics of garments you reinvent with a sleeve addition, and message me if anything is unclear